• Fully Digital "Self-Contained" Design.
• Rear Mounted LED Bar Display of % IR Input Signal
• Programmable 270°C to 1000°c Trip Level
• Operates from 24 VDC Supply or 80-240VAC
• Lens Option: 0.5° x 25°, 0.5° x 15°, and 0.5° x 5° F.O.V. Slit Rectangular Lens
• Programmable Response Times from 1ms to 250ms
• Control Relay with SPNO Contact
• NPN and PNP Transistor Outputs
• Remote Self-test Facility
• Programmable Response Times from 1ms to 250ms
• Control Relay with SPNO Contact
• Robust IP66 aluminum housing with water coolant chamber and separate air purge facility.
• Optional Unique Combined Air Purge and Coolant Facility
• Direct Replacement for the MCSL Model MD8100 and Model MD85100

Typical Applications

• Detection of Hot Metal or Hot Product in a Rod Mill, Bar Mall, Hot Strip Mill or other Steel Mill and Industrial Applications.

Description

The MSE-HMD85 is a fully digital "All-in-One" Hot Metal Detector uniquely incorporating a bar display showing the % IR input signal relative to the pre-set threshold as well as programmable thresholds and response times via simple programming switch action. This and the universal connection format means it provides the user with one universal Detector that can be used throughout the mill.

The MSE-HMD85 is the economical choice. Now there is no need to stock various Detectors for each location. Costly multiple inventory can be replaced by one Detector.

The MSE-HMD85 Digital Hot Metal Detector is a robust sensor activated by the infra-red energy radiating from the hot product. Impervious to water or steam it is built to withstand the harshest of environments. The lens incorporates filtering that removes the visible spectrum to minimize sensitivity to extraneous light. For general tracking applications spot lenses are commonly the choice. For applications where the bar bounces or there is strip to be detected, and for precise detection is essential then the 0.5° x 25° FOV lens should be utilized.

This MSE-HMD85 Digital Hot Metal Detector  is especially suitable where ambient temperatures are subject to large changes. In standard housing format, a large air cooled chamber vents via deflector in front of the lens to allow the use of non-instrument air and provides air purging. Alternatively, an optional sealed loop water coolant radiator accommodates tap pressure and a separate air purge inlet may be provided.

The MSE-HMD85 is a direct replacement for the MCSL Model MD8100 and Model MD85100 Hot Metal Detectors. Please contact us for additional information.