|
MODULOC SENSOR ENTERPRISES offers a extensive variety of
Laser Triangulation Distance Measurement Sensors from
Danish Sensor Engineering (DSE).
DSE develops and
manufactures high quality laser triangulation sensors,
Their goal is to create the best products in the market
for non contact distance measurement. Their team of
engineers and software technicians constantly strive to
develop solutions that give their customers the quality
they expect.
What is a DSE ODS distance sensor?
A distance sensor is a device that utilizes a laser and
CCD-camera to measure the distance between the sensor
and the target object. This high-quality laser sensor
employs advanced digital electronics to ensure precise
and accurate measurements. It can be used on various
surfaces such as asphalt, cardboard, fiber, foam, food,
glass, granulate, liquid, metal, paper, plastic, powder,
rubber, steel, stone, and wood.
|
|
|
Moduloc Laser Triangulation
Sensors
|
| |
 |
 |
|
ODS Compact-Line Laser
Triangulation Sensor
|
ODS Grey-Line Laser
Triangulation Sensor
|
Distance Measurement Range Models up
to 450 mm
with micron Accuracy.
Measuring Range:
50-200 mm.
Center distance:
75-225 mm
Housing Dimensions: 48 x 40 x
19.5 mm
4 Models Available
USB
Connectivity Available
|
Distance Measurement Range Models up
to 170 mm
with micron Accuracy.
Measuring Range:
50-100 mm.
Center distance:
72.5-120 mm
Housing Dimensions: 120 x 95
x 31.5 mm
5 Model Ranges Available
High Temperature Models available that can be used with
hot or molten metal up to 1000°C (1832°F), 1300°F (2372°F),
1500°C (2732°F), and 2200°C (3992°F).
Ethernet Connectivity Available |
 |
 |
|
ODS Black-Line Laser
Triangulation Sensor
|
ODS Red-Line Laser
Triangulation Sensor
|
Distance Measurement Range Models up
to 1150 mm
with micron to mm
Accuracy.
Measuring Range:
50-750 mm.
Center distance: 205
-775 mm
Dimensions: 120 x 95 x
31.5 mm
10 Model Ranges s Available
High Temperature Models available that can be used with
hot or molten metal up to 1000°C (1832°F), 1300°F (2372°F),
1500°C (2732°F), and 2200°C (3992°F).
Ethernet Connectivity Available |
Long
Distance Measurement Range Models up
to 4000 mm
with mm Accuracy.
Measuring Range:
100-2000 mm.
Center distance:
50-3000 mm
Dimensions: 255 x 205
x 70 mm
7 Model Ranges Available
High Temperature Models available that can be used with
hot or molten metal up to 1000°C (1832°F), 1300°F (2372°F),
1500°C (2732°F), and 2200°C (3992°F).
Ethernet Connectivity Available
|
|
|
|
Accurate Laser Distance Measurement by laser
triangulation, ideal for Precision Applications
Advanced Laser Triangulation and CCD array technique with digital signal processing
Over 25 models available with minimum working ranges down to
16mm and maximum working range up to 4 meters
High Temperature Models available that can be used with hot or molten metal up to 1000°C (1832°F), 1300°F (2372°F), 1500°C (2732°F), and 2200°C (3992°F).
A single ODS sensor is used for measuring
distance to the target or product. But. if two
ODS sensors of the same type are interconnected
they will automatically synchronize as a master
and a slave system. If the two sensors are
measuring from each side of an object, the
master will output the thickness, or the length
or the width variation of the object.
Typical Applications using two ODS sensors that
are High Temperature Models : Hot Slab Width
Measurement, and Hot
Slab Thickness Measurement up to 1000°C (1832°F), 1300°F (2372°F), 1500°C (2732°F), and 2200°C (3992°F).).
|
| |
|
|
|
|
|
|
|
|
