MSE-RT20  Cold and Hot Metal Detector Retro-Reflective Laser Barrier

 The following is specifications and dimensional information on the housing for the MSE-RT20Cold and Hot Metal Detector Retro-Reflective Laser Barrier.

The MSE-RT20  Cold and Hot Metal Detector Retro-Reflective Laser Barrier's electronic circuitry is packaged in a robust cast aluminum housing. The housing includes a large air cooled chamber which is separated from the electronic circuitry compartment. An air purge inlet is located in the rear of the cast aluminum housing. Pressurized air passes though this chamber, cooling the cast aluminum housing thus cooling the electronic circuitry. The air vents in the front of the housing via a slot in front of the lens providing air purging. Further cooling of the air can be accomplished with the use of an in-line vortex tube air cooler. 

As an option, a sealed water coolant radiator & separate air purging facility can be provided. The copper water coolant radiator is mounted internal to the air cooled chamber. Coolant inlet and outlet fittings are provided in the rear of the cast aluminum housing. An air inlet is fitted in the front nozzle of the housing and air is vented out the front of the nozzle in front of the lens.

Further cooling of the air can be accomplished with the use of an optional vortex tube in-line air cooler in place of water cooling. An optional Modular Air Combination Unit is available that includes a pressure relief valve, an air filter with 5 μm filtration, a coalescing filter with 0.01 μm filtration and an adjustable pressure regulator. 

The heat reflective protective cover is custom fabricated and is made with Eko-Therm™ aluminized Kevlar with high temperature construction and high temperature Velcro® closures. The cover provides a unique combination of thermal insulation and heat reflective qualities. It helps maintain cooling process line temperatures in high ambient conditions or alongside external radiating heat sources. The cover is constructed in 3 layers to provide maximum insulation properties to meet or exceed maximum temperature requirements

The standard the MSE-RT20 is supplied with a cable assembly which includes a mating M23, IP66 rated 12-pin female plug and a 12 conductor color coded cable with flying leads. The standard cable length is 2 meters. The cable assembly is also available in optional lengths of 5, 10 and 15 meters.

The MSE-RT20  is a direct replacement for the MCSL Model LT200M. Please contact us for additional information.